Skip to main content

What Property Managers Should Do in the First 24 Hours After Water Damage

When a property manager discovers water damage, they have several things to manage at once. Start by keeping people out of unsafe areas and stopping the water source when you can do so safely. Document what happened, contact a restoration company, and notify the property owner and insurance provider.

Commercial and multifamily properties add another layer to the response. Tenants may need updates, ownership needs information, and vendors or restoration crews may need access to different parts of the building.

Bring in commercial restoration professionals early when the loss requires more than on-site staff can safely handle. This allows property management to focus on the building and its occupants while trained crews begin addressing the water damage.

Water damage response graphic showing property managers should protect occupants and stop or isolate the water source when safe.

First Priority: Protect People and Stop the Water

Before cleanup begins, make sure the affected area is safe. Keep tenants, employees, and visitors away from standing water and any part of the property where water may have created an electrical or structural hazard.

Address Immediate Safety Hazards

Wet floors create slip hazards, but bigger concerns may be less obvious. Water near electrical panels, outlets, appliances, or other powered equipment can make an area unsafe. OSHA provides specific guidance on electrical hazards in wet and flooded areas.

Look at the condition of the space as well. Sagging ceilings, fallen drywall, or other visible damage are reasons to restrict access. Property managers should not enter a questionable area simply to inspect the damage or begin cleanup. Bring in qualified personnel when electrical or structural conditions are a concern.

Stop or Isolate the Water Source When Safe

Once the area is secure, determine whether water is still entering the property. A leaking fixture, supply line, or appliance may have a shutoff that maintenance staff can safely access. A broken plumbing line may require a plumber, while roof leaks or exterior water intrusion can involve other qualified contractors.

Stopping or isolating the source prevents additional water from entering the property. It does not address the water damage that has already occurred.

Water damage documentation infographic showing photos, time discovered, affected areas, actions taken, and incident updates for property managers.

Document the Damage Before Cleanup Changes the Scene

Once conditions are safe, start documenting the loss. Photos and video are important, but they are only part of the record a property manager should keep.

What Property Managers Should Document

Start an incident log while the details are still fresh. Record:

  • When the damage was discovered and who reported it
  • The known or suspected source
  • Rooms, units, common areas, or other spaces affected
  • Photos and video of the affected areas
  • Visible damage to the building and other property
  • Information reported by tenants or other occupants
  • Steps already taken to limit additional damage
  • Vendors, contractors, or emergency personnel contacted
  • When important response actions occurred

Take photos before cleanup changes the area when it is safe and practical to do so. Damage documentation can provide a useful record of conditions early in the loss.

Keep the Record Updated as the Response Develops

Keep adding to the incident record as more information becomes available and restoration work progresses.

The property manager’s records establish what was reported, observed, and done during the response. Professional restoration documentation adds another layer, including findings from the affected areas, moisture readings, work performed, and drying progress. Together, those records provide a more complete account of the loss from discovery through restoration.

Call a Water Damage Restoration Company Early

A commercial or multifamily water loss may require professional water restoration when water spreads beyond an area property staff can safely and completely address. Removing standing water is only one part of the response. The next step is determining what got wet and what it will take to dry it.

What a Professional Water Damage Assessment Looks For

A restoration team must identify the affected area before deciding how to address it. That assessment may include:

  • Building materials that were exposed to water
  • How far water has traveled from the source
  • Moisture that is not visible from the surface
  • Conditions around the source of the loss
  • Adjacent rooms, units, floors, or other spaces that may be affected
  • Areas where water needs to be extracted
  • Materials and spaces that need to be dried
  • Materials that may require further evaluation

The assessment may also include moisture-detection technology to help identify affected materials beyond what is visible from the surface.

Property management can also help the assessment move more efficiently by providing details about when the loss was discovered, the suspected source, affected spaces, building access, and actions already taken.

Notify the People Who Need to Know

A water loss at a commercial or multifamily property can affect more than the building itself. Property managers may need to communicate with ownership, the insurance provider, tenants or occupants, and the restoration team. Each group needs different information.

Notify Ownership and Insurance

Notify the property owner and appropriate insurance contact promptly. The National Association of Insurance Commissioners recommends contacting the insurance company or agent as soon as possible when reporting a property loss. 

Stick to what is known at that point. Share when the damage was discovered, the apparent source if known, which areas are affected, what immediate actions have been taken, and what documentation is available.

Keep a record of insurance-related calls, emails, and other communications. The NAIC also recommends maintaining records of correspondence with an insurance company, including dates and details of conversations.

Early in the response, avoid guessing about the full extent of the damage, who may be responsible, or what insurance will cover. Those questions may require additional investigation or information.

Give Tenants and Occupants Clear Updates

Tenants and occupants do not need every detail of the restoration process. They need clear information about how the water damage affects them and what they should do next.

Tell them:

  • What happened based on the information currently available
  • Which areas are affected or restricted
  • Whether normal access has changed
  • Whether restoration crews will need access to occupied spaces
  • What to do with belongings in affected areas, when applicable
  • When they can expect another update

Conditions can change as restoration crews evaluate the property, so avoid giving occupants a timeline that has not been established. A clear next-update time gives people a point of reference even when every answer is not yet available.

Property management also serves as an important link between occupants and the restoration crew. Coordinating access to units, offices, mechanical areas, or other restricted spaces helps crews reach the areas they need to evaluate without leaving tenants or occupants unsure about who is entering the property and why.

Don't Let Visible Water Define the Damage

The spot where water is first discovered does not necessarily show the full affected area. Water can move into surrounding materials and spaces, so you need to determine the boundary of the loss rather than assume it.

Cutaway graphic showing how water damage can spread behind drywall, into wall cavities, under flooring, and into nearby materials.

Where Hidden Moisture Can Travel

Depending on where the water originated and how the building is constructed, moisture may extend into:

  • Drywall and the space behind it
  • Wall cavities
  • Flooring and materials beneath it
  • Subfloors
  • Baseboards
  • Ceilings
  • Adjacent rooms
  • Neighboring units or spaces

A property manager may see water around a leaking fixture, for example, while moisture has already moved beneath the flooring or into the wall assembly. A ceiling stain may show where water became visible without showing everywhere the water traveled.

This is why the initial walkthrough provides a starting point, not necessarily the final boundary of the loss. Our guide to hidden water damage explains more about how water can spread through a building before the damage becomes obvious.

Why Moisture Detection Matters

Sight and touch can identify obvious wet areas, but they cannot reliably show where the affected area ends. Moisture measurements give restoration professionals more information about conditions within building materials.

The goal is to follow the path of the water and establish which materials and spaces were affected. Those findings help define where extraction or drying is needed rather than basing the response only on visible damage.

Moisture detection can also change the picture after the first walkthrough. If readings indicate moisture beyond the initially identified area, the affected area can be expanded and the drying plan adjusted accordingly.

Property managers unsure whether a previous or less obvious water problem affected other areas can also use READY 5’s water damage risk assessment to identify warning signs that may warrant a closer look.

Know What Should Happen During the Rest of the First 24 Hours

Once the affected area is identified, the response shifts from determining where the water went to removing it and starting the drying process. What happens next will depend on the amount of water, the materials involved, and conditions throughout the affected spaces.

Water Extraction and Structural Drying

Extract standing water where needed before focusing on drying moisture from affected materials. From there, the restoration team can establish a drying strategy for the property.

That may involve air-moving equipment to promote evaporation and dehumidification equipment to remove moisture from the air. The type, amount, and placement of equipment will depend on conditions at the property rather than a standard setup used for every water loss.

Different materials also respond differently to water. Flooring, drywall, wood, concrete, and other building materials may require different approaches as crews work to dry the affected area.

Moisture Monitoring and Progress Documentation

Installing drying equipment is the beginning of the process, not the end. The property needs to be monitored as conditions change.

Moisture readings taken during the initial assessment provide a starting point. Follow-up readings can then show whether affected materials are drying and give the restoration team the information needed to adjust the drying plan as needed. The EPA notes that moisture meters can measure moisture in building materials and monitor the drying process.

For a property manager, this creates a record of what is happening after the equipment is installed. READY 5 maintains daily drying logs to track conditions and restoration progress. That information also supports ongoing communication with property management and insurer reporting.

The important question is not simply whether drying equipment is running. It is whether conditions at the property show that the affected materials are actually drying.

Avoid These Mistakes During a Water Damage Emergency

The first decisions made after a water loss can affect how easily the property can be assessed, documented, and restored. Property managers should avoid:

  • Waiting for wet areas to dry on their own. Materials can remain wet even when surfaces begin to look or feel dry. Waiting also delays the assessment needed to determine the actual affected area.
  • Assuming visible damage is the full extent of the loss. The original leak or wet area may not show how far water has traveled through surrounding materials or into adjacent spaces.
  • Entering an area that may be unsafe. Do not send property staff into areas with standing water near electrical equipment, damaged ceilings, or other conditions that may make the space unsafe. Restrict access until the area can be appropriately evaluated.
  • Discarding damaged materials or property too soon. Document affected items and conditions before disposal when it is safe and practical to do so. Once something is removed, it may no longer be available as part of the property’s loss record.
  • Losing track of the response. Calls, vendor arrivals, access decisions, occupant reports, and other actions can become difficult to reconstruct later. Keep the incident record current as the response develops.
  • Treating every water loss the same way. A small contained leak and water that has moved through multiple rooms, floors, or units do not present the same restoration needs. The response should be based on the conditions found at the property.

For property managers, these mistakes can create problems beyond the damaged materials themselves. They can make it harder to coordinate occupants and vendors, establish what happened, define the affected area, and keep the restoration response organized.

First 24-Hour Water Damage Checklist for Property Managers

Use this checklist to keep the initial response organized during a commercial or multifamily water loss:

  1. Protect occupants and restrict unsafe areas. Keep people away from standing water, electrical hazards, damaged ceilings, and other questionable conditions.
  2. Stop or isolate the water source when safe. Shut off an accessible fixture, appliance, or supply line when appropriate, or bring in the qualified contractor needed to control the source.
  3. Document the source and visible damage. Take photos and video before cleanup changes the scene when conditions allow.
  4. Start an incident log. Record when the loss was discovered, who reported it, affected areas, important calls, vendors contacted, and actions taken.
  5. Contact a professional restoration company. Determine the affected area before you can determine the full restoration response.
  6. Notify ownership and insurance. Share the facts known at that point and keep a record of important communications.
  7. Update affected tenants or occupants. Explain restricted areas, access changes, restoration activity that affects them, and when they should expect another update.
  8. Begin appropriate water extraction and drying. The restoration approach should reflect the materials, moisture conditions, and areas affected by the loss.
  9. Check beyond the obvious wet area. Moisture detection can help determine whether water reached surrounding materials, rooms, floors, or units.
  10. Keep documenting the response. Continue recording restoration activity, changing conditions, moisture readings, and other important developments as the property dries.

The first 24 hours require property managers to manage several parts of the response at once. A checklist helps keep safety, occupants, documentation, communication, and restoration moving together, rather than letting one part of the response slip.

When Water Damage Happens, READY 5 Is Ready

Commercial water damage can involve multiple areas of a property, hidden moisture, ongoing drying, and communication with several people at once. READY 5 supports that response with water extraction, structural drying, moisture detection, and continued monitoring throughout the restoration process.

Our team documents drying progress with daily drying logs and keeps property management informed as conditions change. We also work directly with insurance providers, helping keep the restoration process and supporting documentation organized from the initial response through drying.

If your commercial or multifamily property has water damage, call 855-5READY5 for immediate assistance.

Frequently Asked Questions (FAQs) About Water Damage for Property Managers

How quickly should a property manager respond to water damage?

Property managers should begin responding as soon as water damage is discovered and conditions allow. Protect occupants first, stop or isolate the water source when it is safe to do so, and begin documenting the loss. The scope of the damage and conditions at the property will determine what additional response is needed.

Yes, when it is safe and practical. Take photos and video of the source, affected areas, and visible damage before cleanup changes the scene. Documentation should not delay actions needed to protect people or stop additional water from entering the property.

Staining, swelling, damaged baseboards, soft materials, or changes in flooring can indicate hidden water damage, but visual signs cannot show the full extent of a loss. Moisture detection equipment can help determine whether water has reached wall cavities, flooring, subfloors, or adjoining spaces.

Call a professional restoration company when water damage extends beyond what property staff can safely and completely address. This can include standing water, wet building materials, suspected hidden moisture, multiple affected rooms or units, or situations where the property cannot be properly dried with available resources.

Tell affected tenants what is known, which areas are restricted, whether access has changed, and whether restoration crews will need to enter occupied spaces. Avoid giving an unconfirmed restoration timeline. Instead, tell tenants when they can expect the next update and provide new information as conditions change.

    PAYMENTS

    You are now leaving the READY 5 website and going to our online payment portal.